BoatSpeed

Sailing

displays the current speed, gps position, course and heeling of your boat as provided by the GPS of your phone. To switch the display between km/h, m/s and kt press and hold the number showing the speed.

Navigation

Does the same as Sailing and aditionally shows your current postion at the open-sea-map.

Tracking

allows you to store the geocordes as well as the speed and course of your trip.

There are two modes, "regatta"-mode regularry takes a waypoint every few seconds - which leads to a lot of data - while "cruising" only stores values when things have changes. For details see "Help".

Trackings runs in the background even if the app itself is no longer visible.

Recorded tracks are displayed at the open-sea-map and may be exportet to gpx, csv and jpg-image.

Regatta

provides a regatta start countdown. Long tab at the time display to set the countdown time. After countdown the display switches to the Sailing view.

Anchor Alert

reports by sound and light signal if your boat reaches a configurable distance from your anchor position. Press long on the distance-display to set the alarm ringtone. The alarm distance can be set by pressing the smaller "Change" button at the bottom. The anchor alarm starts by clicking the "Start", stops by "Stop".

Warning: The anchor alert does not replace the deck guard. It must only be used supportive. Apart from hardware limitations of your device also the Android operating system can interrupt background processes as anchor alarm is. This will prevent Anchor Alert from working as expected.

Limitation of Liability:

The software and your documentation is provided "as is" without guarantee for function, correctness or accuracy. For any direct or indirect damage - in particular damage to other software, hardware damage, damage from loss of use and damage from inoperability of the software, the author can not be held responsible. Only the user is liable for the consequences of using this software. This software was designed with the utmost care, however errors can never be excluded. Therefore, it can not guarantee your safety or the safety of your data.

帆船

显示手机GPS提供的当前速度，GPS位置，航向和横倾。要在km / h，m / s和kt之间切换显示，请按住显示速度的数字。

导航

与帆船相同，并且在开阔海图上显示您当前的位置。

跟踪

允许您存储geocordes以及旅行的速度和路线。

有两种模式，“regatta” - 模式常规每隔几秒就会获得一个航路点 - 这会产生大量数据 - 而“巡航”只会在事情发生变化时存储值。有关详情，请参阅“帮助”。

即使应用程序本身不再可见，跟踪也会在后台运行。

录制的曲目显示在开放海图上，可以导出到gpx，csv和jpg-image。

帆船赛

提供帆船赛开始倒计时。时间长标签显示设置倒计时时间。倒计时后，显示屏切换到Sailing视图。

锚警报

如果您的船到达锚位置的可配置距离，则通过声光信号报告。在距离显示屏上长按以设置闹钟铃声。可以通过按下底部较小的“更改”按钮来设置报警距离。通过单击“开始”开始锚定警报，通过“停止”停止。

警告：锚警报不会取代甲板护罩。它只能用于支持。除了设备的硬件限制外，Android操作系统还可以在锚定警报中断后台进程。这将阻止Anchor Alert按预期工作。

责任限制：

软件和文档按“原样”提供，不保证功能，正确性或准确性。对于任何直接或间接损害 - 特别是对其他软件的损坏，硬件损坏，使用损失和软件无法操作造成的损害，作者不承担任何责任。只有用户对使用此软件的后果负责。该软件的设计非常谨慎，但绝不能排除错误。因此，它无法保证您的安全或数据的安全。